Loading for Tear-off Operation
- Open the printhead.
- Slide the media guide and media supply guide as far from the printer frame
as possible. Flip down the media supply guide.
- Load media as shown in Figure 1.
- Flip the media supply guide to the upright position. Slide in the media
guide and media supply guide so they just touch, but not restrict, the edge
of the roll.
- Load the
ribbon if used and close the printhead.
|
|
|
Figure 1. Tear-Off |
Click
here for Rewind loading.
Click here for Peel Off loading.
Click here for Cutter loading.