Standard Features
- Fully integrated ThingMagic UHF
RFID Reader/Encoder
- EPC Class 1
- EPC Class 0
- Matrics' 0+
- ISO 18000-06B
- EPC "GEN 2" via firmware Update
- RFID processes optimized for
fastest label throughput.
- New RFID ZPL commands allow ease
of RFID set-up with maximum flexibility.
- Program position allows users to
place transponders virtually anywhere within a smart label.
- RFID Calibration feature
automatically selects the program position for optimal transponder placement.
- RFID counters keep track of the
good and bad labels.
- Variable RFID power settings for
both read and write allows maximum flexibility for printing small labels.
- Full function front panel and multilingual back-lit LCD display with user
programmable password protection
- 4.0 MB Flash memory, including 2.0 MB user-available non-volatile memory
storage for downloadable objects.
- ZebraLink - the revolutionary real-time connectivity and control
solution
- ZBI (Zebra BASIC Interpreter)
- WebView (requires optional ZebraNet ® PrintServer)
- Alerts (requires optional ZebraNet PrintServer)
- Communications via serial RS-232 and bi-directional
Parallel port
with auto detect
- USB 2.0 (480 Mbits/second) port
- Thin film print head with E 3® Element Energy Control
- Thermal transfer and thermal direct printing of bar codes, text, and
graphics
- Dual media sensors, transmissive and reflective, selectable through
software or front panel
- ZPL ® or ZPL II ® programming language, selectable through software or
front panel
- ZBI - Zebra BASIC interpreter for translation of foreign data
streams into ZPL II
- 32 bit 133 Mhz RISC
processor
- 16 MB SDRAM memory, 12 MB
user-available.
- Type I, II linear memory only up
to 32 MB and future availability of Type III Series PC Card Interface
- Simultaneous ATA-style PCMCIA and
Compact Flash (CF) memory card support up to 1 GB (current market availability) for additional
storage of fonts, graphics, logos, templates, and label formats or
preprogrammed with optional and international fonts. PCMCIA is externally
accessible and hot swappable. CF is internal.
- Clear media side door - easy monitoring of supplies usage without
opening the printer
- Zebra printer driver for Windows 95/98/NT/2000 operating
systems
- Internal real-time clock
- Advanced label/media counters
- Auto calibration-printer
calibrates when printer is turned on or when printhead is closed with
approximately two labels
- Early Warning Systems-provide low
label, low ribbon, and clean printhead alerts via the front panel and
ZebraLink Alerts.
Optional Features
- ZebraNet PrintServer II - provides Ethernet connectivity and full use of
Zebranet Web View and Alert features
- ZebraNet Wireless Card
Socket-provides an internally integrated wireless option and supports
multiple third party LAN radio cards
- Clear media side bi-fold door - allows shorter media door opening radius
- Full-width rotary knife cutter and catch tray, operates under software
control cutting labels individually or in strips
Cutter Catch tray 10.5" long by 4.5" wide
- Media rewind spindle - rewinds finished roll internally onto 3"
(76mm) core,
or enables label peel and liner rewind
- 3" (76mm) core enables label
peel and liner rewind
- RS-422/485 with
multidrop capability to network to multiple printers from a single host
with external adaptor P/N 33114M
- IBM ® Twinax interface - emulates IBM System 3X and AS/400 printers
- IBM Coax interface - emulates IBM System 3270 printers
- Applicator interface - provides status and control signals for applicators
and remote control devices
- Media supply spindle for 3"
(76mm) core or 40 mm core (in lieu of standard
hanger)
- Linear PCMCIA cards are available
8 MB and 32 MB
- ATA-style PCMCIA or Compact Flash
memory cards 16,
32, 64, 128, 256 MB
- Additional fonts available
- BAR-ONE® Windows-based WYSIWYG
on-screen label design and print application software
R110Xi
203 DPI Field Installable Kits |
Part Number |
External ZebraNet PrintServer II (10Base-T) |
46692 |
Internal ZebraNet PrintServer II (10Base-T) |
46689 |
External
ZebraNet 10/100 Print Server |
47490 |
Internal
ZebraNet 10/100 Print Server |
47480 |
ZebraNet Wireless Plus Internal Print Server |
29652-002M |
ZebraNet Wireless Plus Print Server |
29651-002M |
ZebraNet
Wireless Print Server (replaces standard PC card option board)
(N/A) |
G79094 |
Cutter |
41353 |
Cutter Catch Tray
(Cutter Catch tray 10.5" long
by 4.5" wide) |
47459 |
Rewind Option Field Install Kit |
41355 |
Internal Fan-Fold Media Supply Bin (Not Compatible with
Rewind or Peel Options) |
30276 |
Twinax Interface |
48924 |
Coax Interface |
48925 |
Applicator Port |
49726M |
USB Cable (15 foot long) |
33011 |
Optional
RS422/RS485 adapter |
33114M |
Optional RS232 DB9
to DB25 adapter |
33138 |
RS485 Network w/Stand, DIN
Converter Kit |
46790 |
RS485 Network w/Mini-DIN Converter
Kit |
46890 |
RS485 Y-Connection Cable for
Printer-to-Printer |
46485 |
8
Meg PCMCIA Flash Memory Card |
46999-0008 |
32
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-032 |
64
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-064 |
128
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-128 |
256
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-256 |
32 Meg
Compact Flash Memory Card |
33193-032 |
64 Meg
Compact Flash Memory Card |
33193-064 |
128 Meg
Compact Flash Memory Card |
33193-128 |
256 Meg
Compact Flash Memory Card |
33193-256 |
Preventative
Maintenance Kit |
47362 |
Printing Specifications
- 203 dpi resolution (8 dots/mm)
- Dot size (W x L):0.0049" x
0.0049" (0.125mm x 0.125mm)
- First dot location measured from inside media edge:
-
0.10" +/-0.035" (2.5mm +/-0.9mm)
- Maximum print width: 4"
(103mm)
- Maximum non-continuous media print length:
-
16MB memory = 39" (991 mm)
- Maximum continuous media print length:
-
16MB memory = 150" (3810 mm)
- Media registration tolerance:
-
*Vertical = < +/-0.060" (+/-1.5mm) on non-continuous media
-
Horizontal = < +/-0.060" (+/-1.5mm)
- Programmable print speeds:
-
2.4" (61 mm), 3" (76mm) through
10"(254mm) per second in
1" (25mm) increments
- Bar code modulus "X" dimension:
-
Picket fence (non-rotated) orientation = 4.9 mil to 49 mil
-
Ladder (rotated) orientation = 4.9 mil to 49 mil
*Media registration and minimum label
length are affected by media type and width, ribbon type, and print speed.
Performance improves as these
factors are optimized. Zebra recommends always qualifying any application with
thorough testing.
Media Specifications
- Transponders utilizing the
following protocols are supported:
- EPC Class 1
- EPC Class 0
- Matrics' 0+
- ISO 18000-06B
- EPC "GEN 2" via firmware Update
- Media type: continuous, die-cut, or black mark
- Media width (label and liner):
0.79" (20 mm) to 4.5" (114 mm)
- Minimum label length: *
-
Rewind mode: 0.25" (6mm)
-
Peel mode: 0.5" (13mm)
-
Tear-off mode: 0.7" (18mm)
-
Cutter mode: 1.5" (38mm)
- Media thickness (label and liner):
-
0.003" (0.076mm) to 0.012" (0.305mm)
- Maximum full-width media thickness
for cutter:
0.23 mm (0.009")
- Maximum media roll size:
-
8.0" (203mm) O.D. on a 3" (76mm) I.D. core
- Transmissive (gap) sensing standards:
- Interlabel gap: 2 - 4mm, preferably 3mm
- Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)
- Sensing hole: 0.125" (3mm) diameter
- Reflective (black mark) sensing standards:
- Black mark length (parallel to inside media edge): 0.12" - 0.43"
(3 - 11mm)
- Black mark width (perpendicular to inside media edge): 0.43" (>
11mm)
- Black mark location: within 0.040" (1mm) of inside media edge:
- Black mark density: >1.0 Optical Density Units (ODU)
- Maximum media density: 0.5 ODU
*Media registration and minimum label
length are affected by media type and width, ribbon type, and print speed.
Performance improves as these
factors are optimized. Zebra recommends always qualifying any application with
thorough testing.
Ribbon Specifications
- width: 0.79" (20 mm) to 4.33" (110 mm)
- Standard Lengths: 1476' (450m) or 984' (300m)
-
Provides 2:1 and 3:1 media roll to ribbon ratios
- Maximum ribbon roll size:
-
3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core
- Ribbon wound coated-side out
Font Specifications
- Bitmap fonts A through H and GS symbols are expandable up to 10 times,
height and width independent
- Smooth scalable font Ø (CG Triumvirate Bold Condensed) is expandable
dot-by-dot, height and width independent
- IBM Code Page 850 International Characters
Fonts |
Matrix in dots HxW |
Type |
Minimum Character Size
HxW |
Maximum C.P.I. |
A |
9x5 |
U-L-D |
.044"x.029" |
33.9 |
B |
11x7 |
U |
.054"x.044" |
22.6 |
C,D |
18x10 |
U-L-D |
.088"x.059" |
16.9 |
E |
41x20 |
OCR-B |
.138"x.098" |
10.1 |
F |
26x13 |
U-L-D |
.128"x.079" |
12.7 |
G |
60x40 |
U-L-D |
.295"x.236" |
4.2 |
H |
30x19 |
OCR-A |
.103"x.093" |
10.7 |
GS |
24x24 |
SYMBOL |
.118"x.118" |
8.4 |
Ø |
variable |
U-L-D |
variable |
N/A |
U - Uppercase L - Lowercase D - Descenders
Bar Code Symbologies
& Specifications
Bar code ratios: 2:1, 7:3, 5:2, and 3:1
Linear bar codes: Code
11, Code 39, Code 93, Code 128 with subsets A/B/C and UCC Case Codes, ISBT -128,
UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2- or 5-digit extensions, Plessey,
Postnet, Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MSI,
Codabar and Planet Code
2-dimensional bar codes:
Codablock, PDF-417, Code 49, DataMatrix, Maxi Code, QR Code and TLC 39, RSS-14
(and composite)
Zebra Programming Language
® (ZPL ® and ZPL II ®
)
- Communicates in printable ASCII characters
- Compatible with mainframe, mini, and PC hosts
- Downloadable objects include graphics, scalable and bitmap fonts, label
templates and formats
- Object copying between memory
areas (RAM and PC memory card)
- Adjustable print cache (^COY)
- Data compression
- Automatic memory allocation for format while printing
- Automatic serialization of fields (^SN and ^SF)
- Format inversion (white on black) (^FR and ^LR)
- Mirror-image printing (^PM)
- Four position field rotation (0°, 90°, 180°, 270°) (^FW)
- Slew command (^PF and ^PH)
- Programmable label quantities with print, pause, cut control (^PQ)
- User programmable password (^KP)
- Status messages to host upon
request (~HS)
- ZBI (Zebra BASIC Interpreter)
- Interpreting program module that sits between the communication ports
and the ZPLII processing engine
- Can be used to convert non-ZPL printer programming language to ZPL
commands
- Direct interface to peripheral devices such as bar-code scanners,
weight scales, and keyboards
- Based on ANSI BASIC computer language
Communications Specifications
- USB 2.0 (480 Mbits/second) port
- High-speed bi-directional parallel interface, IEEE 1284-1994
compatibility, nibble mode, and ECP modes.
- RS-232C serial interface with DB9F connector, optional converter for DB25F
available. Configurable baud rate (110-115.2 kB), parity, data bits, and
stop bits
- Software (XON/XOFF) or hardware (DTR/DSR) communication handshake
protocols
- Optional RS-422/485 with multidrop capability to network multiple printers
from a single host with external adapter P/N
33114M
- IBM® Twinax interface-emulates IBM System 3X and AS/400 printers
- IBM Coax interface-emulates IBM System 3270 printers
- Applicator interface with DB15F connector
Electrical Specifications
- Universal power supply with power-factor correction 90-264VAC, 48-62 Hz
- AAgency approvals: Bi-National UL
60950 3rd edition/CSA CAN/CSAC22.2 No. 60950-00 Third Edition; FCC Part 15.107
& 15.109 Class No. 60950-00 Third Edition; FCC Part 15.107 & 15.109 Class
Environmental Specifications
- Operating environment:
-
Thermal transfer = 41° to 104°F (5° to 40°C)
-
Thermal direct = 32° to 104°F (0° to 40°C)
-
20% to 85% non-condensing R.H
- Storage/Transportation environment:
- -40° to 140°F (-40° to 60°C)
- 5% to 85% non-condensing R.H.
General
Specifications
- Power consumption:
-
Idle = 20W
-
Printing = 121W (printing pause test label at lowest speed)
-
Standby = 25W
- Height: 15.5" (393.7
mm)
- Width: 10.37" (263.5
mm)
- Depth: 19.5" (495.3
mm)
- Weight: 50lbs. (22.7kg)