• 48766-001 ZBI 2.0 Enablement Kit for 1

• 48767-001 ZBI 2.0 Enablement Kit for 5

• 48768-001 ZBI 2.0 Enablement Kit for 25

• 13831-001 Zebra Designer Pro

• 13832-001 Zebra Designer for mySAP Business Suite

• 13833-001 Zebra Designer for XML

• 48733-120 ZebraNet Bridge Enterprise for 1-50 Printers

• 48734-120 ZebraNet Bridge Enterprise for 1-100 Printers

• 48735-120 ZebraNet Bridge Enterprise for 100+ Printers

ZPL II - Universal language for Zebra printers. Simplifies label formatting and enables format compatibility with existing systems that run Zebra printers.

1. Web View - Connect and control Zebra bar code printers via the printer’s Web interface using a common Web browser.

2. Alert - Printers equipped with ZebraNet print servers provide alerts via any email-enabled, wired, or wireless device to minimize downtime.

XML- Enabled printing –direct connect integration for bar code label printing, eliminates license fees and printer server hardware and lowers customization and programming costs. .

• 203 dpi resolution (8 dots/mm) - Dot size (W x L): 0.0049" x 0.0049" (0.125mm x 0.125mm)

• 300 dpi resolution (12 dots/mm) - Dot size (WxL): 0.0033" x 0.0039" (0.084mm x 0.099mm)

• First dot location measured from inside media backing edge: 0.10" +/-.04" (2.5mm, not to exceed -.5mm +1.0mm)

• Maximum print width: 6.6" (168mm)

• Maximum continuous media print length:

Media registration tolerance: Vertical = < ±0.039" (±1.0mm) on non-continuous media --- Horizontal = < +/-0.039" (+/-1.0mm) within a roll

Programmable print speeds:

- 203 dpi = 2.4" (61mm), 3" (76mm) through 10" (254mm) per second in 1" increments

- 300 dpi = 2.4" (61mm), 3" (76mm) through 8" (203mm) per second in 1" increments

• Maximum non-continuous label length: 39" (991mm)

• Media type: continuous, die-cut, tags, black-mark

• Media web width (label and liner):

• 2.0" (51mm) to 7.0" (178mm) Tear / Cutter

• 2.0" (51mm) to 6.75" (171mm) Peel / Rewind

• Minimum label length:

          - 0.5" (12.7mm) in Tear, Peel and Rewind Mode

          - 1.0" (25.4mm) in Cutter Mode

• Media thickness (label and liner):

          0.0023" (0.058mm) to 0.010" (0.25mm)

• Maximum media roll size:

          8.0" (203mm) O.D. on a 3" (76mm) I.D. core

• Maximum fan-fold pack size:

          8.0"L (203mm) x 7.0"W (178mm) x 6.2"H (157mm)

• Gap and notch sensing standards:

          - Inter-label gap: 2 - 4mm, preferably 3mm

          - Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)

          - Sensing hole: 0.125" (3mm) diameter

          * Note: Notch & Hole Position centered from 0.15" to 3.5" from media inner edge

Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times, height and width independently. However, fonts E and H (OCR-A and OCR-B) are not considered "in-spec" when expanded. The scalable smooth font 0 (CG Triumvirate Bold Condensed) is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory. IBM Code Page 850 international character sets are available in the fonts A, B, C, D, E, F, G, and 0 through software control.

Bar code modulus "X" dimension:

-Picket fence (non-rotated) orientation:

203 dpi = 4.9 mil to 49 mil

300 dpi = 3.3 mil to 33 mil

-Ladder (rotated) orientation:

203 dpi = 4.9 mil to 49 mil

300 dpi = 3.9 mil to 39 mil

Bar-Code ratios - 2:1 to 3:1 in supported symbologies

• Aztec

• Codabar (supports ratios of 2:1 to 3:1

• CODABLOCK

• Code 11

• Code 39 (supports ratios of 2:1 to 3:1

• Code 49 (2-D)

• Code 93

• Code 128 (subsets A, B, C, and UCC case C codes)

• Data Matrix

• EAN-8, EAN-13, EAN extensions

• Interleaved 2 of 5 (supports ratios 2:1 to 3:1, modulous10 check digit)

• Planet Code

• Logmars

• MaxiCode (2-D)

• PDF417 (2-D)

• Micro PDF (2-D)

• Plessy

• Postnet

• QR-Code

• MSI

• Standard 2 of 5

• Industrial 2 of 5

• UPC-A, UPC-E, UPC extensions

• RSS

• TLC 39

• Communicates in printable ASCII characters

• Compatible with mainframe, mini, and PC hosts

• Downloadable objects include graphics, scalable and bitmap fonts, label templates and formats

• Adjustable print cache

• Data compression

• Automatic memory allocation for format while printing

• Automatic serialization of fields

• Format inversion (white on black)

• Mirror-image printing

• Four position field rotation (0, 90, 180, 270)

• Slew command

• Programmable label quantities with print, pause, cut control

• Status messages to host upon request

• Unicode -compliant

• Supports UTF-8 and UTF-16

• Natively supports bidirectional and complex scripts

• Support for Open Type Glyph Substitution