The list of supported printers and corresponding part number for the ZebraNet Wireless Plus Internal Print Server.
Note: Minimum x.16.x firmware is required.
The ZebraNet Wireless Plus Internal Option board will only work in the proper printer. The part number for the option board should be listed on the printer's configuration label.
Antenna Part numbers:
The small 1" antenna that comes with the kits is part# 39538M.
The magnetic mount option for the antenna is part# 39518M. (included in PAX4 kit)
Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.
Date Updated: 11/16/2010 08:54:01 AM