Discussion: How to view the settings for the Wireless Print
Unlike the Wired ZebraNet Print Servers, the ZebraNet Wireless Print Server does not have a test button. Also the TCP/IP settings will not print on the Printer's Configuration label.
There is now a Network Configuration label that list both Wired and Wireless Settings. If wireless is not present, it will list only Wired.
Front Panel LCD - Some settings are displayed through the Front Panel LCD. Some these settings will only be displayed if the printer can associate with a WLAN.
From the printers LCD, choose List Network.
Via ZPL, send the ~WL command to one of the printers ports.
There are also various settings that can be view from the LCD on the Printer's Front Panel.
Note: The IP address, Default Gateway, and Subnet Mask will only be displayed on the LCD if the printer can associate to a AP.
The ZebraNet Wireless Print Server does also support the following options to view Configuration details:
Telnet to the IP address of the wireless print server.
From a command prompt type: telnet x.x.x.x (where x.x.x.x is the IP address of the wireless print server)
You will be prompted for a password. The default password is 1234. Choose Option, 1. Show Configuration/Status.
RE: Option 6 - Configure Port: There is no option for Bi-Directional on the Wireless Print Server, since it does not use LPT port.
Note: From telnet you can only view and change TCP/IP settings, not 802.11x related settings.
Some of the pages in WebView have changed. See the following link for details on Web View for ZebraNet Wireless.
Last Updated 06/02/2004
Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.