ZebraNet Bridge Enterprise Network Setup Wizard

In ZebraNet Bridge Enterprise version 1.2.5 the Wireless Setup Wizard's name has been changed to the Network Setup Wizard.

Go to Tools - Network Setup Wizard.

The Choose Port drop down box will display the available local ports.  If the port you want to use is not listed, make sure there is not a printer driver in your Printer and  Faxes folder with the port selected.

The possible choices are Parallel (LPT), Serial (COM), and USB.

Choose the appropriate option:

The Client ID only applies to Option 61 of DHCP.

For Wireless:

Set the ESSID and Security Mode:

When finished you can send directly to printer and/or save the script to a file.

Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Date Updated:  11/13/2008 08:38:43 AM