Testing functionality using FTP.
You can test the functionality of the printer and the print server by sending
EPL directly to the printers
built in ftp server.
- Assign the print server an IP address
- Verify connectivity to the address by issuing a ping
a test EPL script. Something as simple as U (capital "U") will work fine. Take
note of the director that you saved this file in. Click
here to see other sample script.
to a command prompt and change to the directory that the EPL resides in.
ftp x.x.x.x * ( x.x.x.x represent that IP
address of the printserver)
will be prompted for a user name.
user name is not needed. Hit the enter key.
put file.ext *(file.ext represents the EPL filename with the
extension). The name and extension you assign you the file is irrelevant.
The printer is concerned with the EPL contained inside of the
Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is
provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties
of merchantability, fitness for a particular purpose and non-infringement.