Status Indicator Patterns on the ZebraNet Print Server II

Solid Green - hardware is functioning properly and it has detected the presence of the network.

Fast flashing Green (9 times/second) - has not detected presence of network.

Slow flashing Green (1 time/second) -  the unit is sending data to the parallel port on printer.

Flashing Red - Unit is still in self test

Red-Green-Red-Green = Unit is in Netware firmware update mode.

Red-Red-Green-Green = Unit is in IP firmware update mode.

Solid Red for more than 30 seconds- Unit has failed POST.  A failed POST can be caused by any of the following:

• The Printer attached to Printer Server II caused error.  Turn the printer power off, wait 10 seconds, then turn power on.

• The Print Server II has a hardware problem that can only be fixed by Zebra Factory Repair.

Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided ``as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.