Viewing The Zebra Print Server II's Configuration Page

There are 3 ways to view the Print Server II's configuration page.

1. Test Button on Print Server.

2. Telnet

3. WebView

1.    Press the Test Button once on the back of print server.  The printer will print the configuration information. 

Click on link for picture of Z4M & Z6M Plus Internal Print Server II test button.

2. Telnet to the IP address of the printer.

From a command prompt type:  telnet x.x.x.x (where x.x.x.x is the IP address of the print server)

You will be prompted for a password.  The default password is 1234.   Choose Option, 1. Show Configuration/Status. 

3.  You can also view the Print Server II's configuration page from WebView.  Just type in the IP address of the Print Server II in the address bar of your web browser.

Select the link for Print Server Settings, then under Print Server Status select View Configuration Sheet.

You will get an HTML version of the page that can be saved to file and sent to Technical Support if requested.