Status Indicator Patterns on the ZebraNet PS100

Status LED - functionally same as PSII.  (Located under test button)

Green Solid = Good link

Green Blinking  = No link

Red Solid = Failed Post

- The Print Server has a hardware problem that can only be fixed by Zebra Factory Repair.

10/100 LED - Link speed.

     Orange Solid = 10 Base Link

Orange Blinking = 10 Base Link and activity

Green Solid =100 Base Link

Green Blinking =100 Base Link and activity

Note:  The Status LED is closer to the RJ-45 port and the 10/100 LED is on the outside.

Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided ``as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.