Summary
How do I set the print server back to factory defaults?
Details
The best way to default the print server is to power down the printer and power it on again while holding in the test button. You should hold the button in until 10 seconds AFTER the printer passes post which is the first time the LED turns solid green. You can also telnet to the device and choose option 10. i.e. C:\telnet x.x.x.x (where x.x.x.x is the IP address of the print server).
Note: On Tabletop Printers with V60.13.x or Vx.15.x the print server can be defaulted by selecting Default Net from the LCD of the printer.
|
Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided ``as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.
Last Modified: 01/15/2010 09:16 AM