FTP File Transfer Protocol from DOS

1.)    Go to a DOS prompt and change to the directory where the test file is stored.

2.)    From the DOS prompt Type: ftp <space> <ip address of the destination printer > <enter>

3.)      Press <enter>  again.

4.)      You will then see the FTP prompt:   FTP>

5.)      Type: put <space> <filename> <enter>

The file is now sent to its destination.


put test.zpl <enter>  

Note: This allows you to copy a file from DOS, to a printer on your network.

Note:  FTP is case sensitive, use lower case…