Configuring ZebraNet Print Servers on an AS400

This document details how to setup a out queue on a AS/400 system. Applies to the ZebraNet Print Server II and 100baseT.

This procedure assumes that you have already logged in and defined an IP address on the ZebraNet Print Server.  IBM's AS400 supports LPR printing via TCP/IP protocol. Below is an example setup information. On the AS400 go to Create Output Queue (CRTOUTQ) you will see the following:

Type choices, press Enter.

Choices:

Output queue..............>ZBR1_PRINT Name (You can use any desired queue name)
Library.................*CURLIB Name, *CURLIB
Maximum spooled file size:
Number of pages.........*None Number, *None
Starting time........... Time
Ending time............. Time
Order of files on queue....*FIFO *FIFO, *JOBNBR
Remote system..............>*INTNETADR
Remote printer queue.......>portLF1
Writers to autostart.......>1 1-18, *None
Queue for writer messages...QSYSOPR Name
Library..................*LIBL Name, *LIBL, *CURLIB
Connection type............> *IP *SNA, *IP
Destiation type............ *OTHER *OS400, *OS400V2, *PSF...
Transform SCS to ASCII..... *YES *YES, *NO
Manufacture type & model...>*4212 (If not available use any non-laser printer type.) or *WSCST, *WSCSTLETTER, or *WSCSTCONT132  (See Note below)
Internet address...........> xxx.xxx.xxx.xxx
Destination options........ *NONE  (or *QWPDEFAULT) (See Note below)
Text 'description'.........> 'ZEBRA remote printer on Zebranet'

*Note: Conditions for these alternate selections may be version dependent but no details are available

See IBM information.