Product:	Zebra Designer
Category:	Label Design
Solution:	Label Setup
Action	Use Drawing Tools

Product: Zebra Designer

Category: Label Design

Solution: Label Setup

Action: Use Drawing Tools

Now you will insert a line to separate a text object from other objects, and then insert a rectangle around the picture object.

1. Select the icon from Toolbox and move the cursor to the required starting point of the line.

2. Press and hold down the mouse button while drawing the line. Move the mouse to the end position of the line and release the button.

The Line object is placed on the label.

3. Click on the icon in the Toolbox and point the mouse to the upper left corner of the picture.

4. Click and hold the mouse button while you stretch the rectangle to the lower right corner of the picture.

5. To change the thickness of the vertical and horizontal line, double-click on the rectangle object to open its properties. Select the thickness you want and click on the Finish button.

6. To edit the drawing object, double-click on the line or rectangle to open the dialog box with its properties.

The label should show the following:

Drag object handles to change object size

Label with fixed objects

Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Windows and Windows Terminal Server are registered trademarks of Microsoft Corporation. Metaframe is a 
registered trademark of Citrix Systems, Inc.

Zebra Technologies Corporation

(C) 2004 ZIH Corp. All rights reserved.

Last Updated 11/07/2005