Product:	Zebra Designer
Category:	Installation and Setup
Solution:	Label Setup
Action	Insert Bar Code

Insert Bar Code

Now you will add a non-changeable Code 128 bar code on the label.

1. To insert the bar code, click on the button in the Toolbox.

2. Move the cursor to the desired position on the label and click on the mouse button.

The dialog box with object properties opens.

3. Type the value 1234567890 for the bar code contents.

4. Click on the Define button.

The Edit Bar Code dialog box opens.

5. Select bar code Code 128 and click on the OK button.

Selecting bar code type

6. Click on the Finish button to return to the label.

7. Change the position of the bar code by selecting the bar code and dragging it to the desired position.

8. Change the object size by dragging the object handles. The handles are small rectangles surrounding the object when it is selected.

The label should now show the following:

Label with text and bar code objects
 

Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Windows and Windows Terminal Server are registered trademarks of Microsoft Corporation. Metaframe is a 
registered trademark of Citrix Systems, Inc.

Zebra Technologies Corporation

(C) 2004 ZIH Corp. All rights reserved.

Last Updated 11/07/2005