Product: ZebraDesigner

Category: Label Design

Solution: Label Setup

Action: Define Label and Page Dimensions

1. If you want to use the label stock, select your choices in the Label Setup Wizard - Select Stock window.

2. Click on the Next button. A new window opens to define the label dimensions manually.

3. Leave the option Page Size on 'User defined' default and check Automatic Sizing.

4. Click the Next button. A new window opens.

5. Select label orientation and print direction.


Selecting label layout

6. Click on the Next button. A new window opens.

7. Type 10 for label width and 7 for label height.
 

Defining label dimensions

Note: To change the unit of measure from centimeters to inches or other supported units, click on the button with unit of measure below the label preview in the dialog box.

8. Click on the Finish button. A new empty label opens.
 


Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Windows and Windows Terminal Server are registered trademarks of Microsoft Corporation. Metaframe is a 
registered trademark of Citrix Systems, Inc.

Zebra Technologies Corporation

(C) 2004 ZIH Corp. All rights reserved.

Last Updated 07/22/2005