Product: Zebra Designer

Category: Label Design

Solution: Label Setup

Action: Create a Basic Label

Create a Basic Label

To create a basic label, do the following:

1. Open ZebraDesigner.

2. Select New in the File menu, or click on the icon in the Standard toolbar.

Each time you create a new label, a Label Setup Wizard starts to help you set up the label and connect to the printer.


Selecting label layout

Note: You can leave the Wizard at any time and accept the default settings for the label by clicking on the Finish button.

Select a Printer

Select a Printer

1. Select the printer you want to use for label printing.

Note: If you don’t find your printer on the list, refer to chapter Install Printer Driver for installation instructions.

2. Click on the Next button.

Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Windows and Windows Terminal Server are registered trademarks of Microsoft Corporation. Metaframe is a 
registered trademark of Citrix Systems, Inc.

Zebra Technologies Corporation

(C) 2004 ZIH Corp. All rights reserved.

Last Updated 07/22/2005