Darkness Adjustment

Enter the Setup Mode

1. To enter the Setup Mode, press the SETUP/EXIT key.

2. The DARKNESS setting will be displayed.

3. Press the SELECT key to toggle the functionality of the INCREMENT (+) or DECREMENT (-) keys.

4. Press the INCREMENT (+) or DECREMENT (-) keys to increase or decrease the value.

5. Press the SELECT key to toggle the functionality of the INCREMENT (+) or DECREMENT (-) keys.

Exit the Setup Mode

Press the SETUP/EXIT key, the "SAVE CHANGES" display will appear.  There are five choices, described below.  Pressing the INCREMENT (+) or DECREMENT (-) key displays other choices and pressing the SELECT key selects the displayed choice.

• PERMANENT - Permanently saves the changes.  Values are stored in the printer even when power is turned off.

• TEMPORARY - Saves the changes until changed again or until power is turned off.

• CANCEL - Cancels all changes since pressing the SETUP/EXIT key except the darkness and tear-off settings (if they were changed).

• LOAD DEFAULTS - Loads factory defaults.

• LOAD LAST SAVE - Loads values from the last permanent save.