R110Xi4 Printer Specifications

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  5/3/2011

R110Xi4 Specifications in PDF Format

Specifications are provided for reference and are based on printer tests using Zebra brand ribbons and labels. Results may vary in actual application settings or when using other than recommended Zebra supplies. Zebra recommends always qualifying any application with thorough testing.

R110Xi4 Features

Printer Features

Optional Features

Printer Options

ZebraNet Print Server Options
Features provided by ZebraNet Print Servers include:

    o Web View web pages — connect and control Zebra bar code printers via the printer's web interface using common internet browsers
    o Alerts —provide alerts via any e-mail-enabled, wired, or wireless device to minimize downtime

Firmware

Printer Operation

ZebraLink Solutions

Media Specifications

* Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing

Ribbon Specifications

Electrical Specifications

Font Specifications

Communications Specifications

Zebra Programming Language® (ZPL II)

Bar Code Symbologies and Specifications

R110Xi4™203 dpi

Printing Specifications

  • 203 dpi resolution (8 dots/mm)
  • Dot size (W x L):
    0.0049 in. x 0.0049 in.
    (0.125 mm x 0.125 mm)
  • First dot location measured from inside media edge:
    0.14 in. ±0.05 in.
    (3.5mm ±1.25 mm)
  • Maximum print width: 4.0 in. (102 mm)
  • Maximum non-continuous media print length (with 16 MB memory):
    39 in. (991 mm)
  • Maximum continuous media print length (with 16 MB memory):
    150 in. (3810 mm)
  • Media registration tolerance: *
    o Vertical:
    ± 0.030 in. (± 0.75 mm) at print speeds at or below 4 ips on non-continuous media
    ± 0.060 in. (± 1.5 mm) at print speeds higher than 4 ips
    o Horizontal:
    ± 0.060 in. (± 1.5 mm)
  • Programmable print speeds (inches per second): 2.4, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
  • Bar code modulus ―"X" dimension:
    o Picket fence (non-rotated) orientation:
    4.9 mil to 49 mil
    o Ladder (rotated) orientation:
    4.9 mil to 49 mil

    Media and Ribbon Specifications
     
  • Media width (label and liner):
    0.79 in. (20 mm) to 4.5 in. (114 mm)
  • Minimum label length: See media specifications above.
  • Maximum full-width media thickness for cutter:
    0.23 mm (0.009 in.)
  • Ribbon width:
    0.79 in. (20 mm) to 4.33 in. (110 mm)

    General Specifications
     
  • Power consumption:
    o Idle = 20 W
    o Printing = 121 W (printing pause test label at lowest speed)
    o Standby = 25 W
  • Height: 15.5 in. (393.7 mm)
  • Width: 10.31 in. (261.9 mm)
  • Depth: 20.38 in. (517.5 mm)
  • Weight: 50 lbs. (22.7 kg)
  • UHF EPC Gen 2, Class 1/ISO 18000-6C compliant
R110Xi4™300 dpi

Printing Specifications

  • 300 dpi resolution (12 dots/ mm)
  • Dot size (W x L):
    0.0033 in. x 0.0039 in.
    (0.084 mm x 0.01 mm)
  • First dot location measured from inside media edge:
    0.08 in. ±0.05 in.
    (2.1 mm ±1.25 mm)
  • Maximum print width: 4.0 in. (102 mm)
  • Maximum non-continuous media print length (with 16 MB memory):
    39 in. (991 mm)
  • Maximum continuous media print length (with 16 MB memory):
    100 in. (2540 mm)
  • Media registration tolerance: *
    o Vertical:
    ± 0.030 in. (± 0.75 mm) at print speeds at or below 4 ips on non-continuous media
    ± 0.060 in. (± 1.5 mm) at print speeds higher than 4 ips
    o Horizontal:
    ± 0.060 in. (± 1.5 mm)
  • Programmable print speeds (inches per second): 2.4, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
  • Bar code modulus ―"X" dimension:
    o Picket fence (non-rotated) orientation:
    3.3 mil to 49 mil
    o Ladder (rotated) orientation:
    3.9 mil to 39 mil

    Media and Ribbon Specifications
     
  • Media width (label and liner):
    0.79 in. (20 mm) to 4.5 in. (114 mm)
  • Minimum label length: See media specifications above.
  • Maximum full-width media thickness for cutter:
    0.23 mm (0.009 in.)
  • Ribbon width:
    0.79 in. (20 mm) to 4.33 in. (110 mm)

    General Specifications
     
  • Power consumption:
    o Idle = 20 W
    o Printing = 121 W (printing pause test label at lowest speed)
    o Standby = 25 W
  • Height: 15.5 in. (393.7 mm)
  • Width: 10.31 in. (261.9 mm)
  • Depth: 20.38 in. (517.5 mm)
  • Weight: 50 lbs. (22.7 kg)
  • UHF EPC Gen 2, Class 1/ISO 18000-6C compliant
R110Xi4™600 dpi

Printing Specifications

  • 600 dpi resolution (23.5 dots/mm)
  • Dot size (W x L):
    0.0016 in. x 0.0016 in.
    (0.042 mm x 0.042 mm)
  • First dot location measured from inside media edge:
    0.08 in. ±0.05 in.
    (2.1 mm ±1.25 mm)
  • Maximum print width: 4.0 in. (102 mm)
  • Maximum non-continuous media print length (with 16 MB memory):
    39 in. (991 mm)
  • Maximum continuous media print length (with 16 MB memory):
    50 in. (2540 mm)
  • Media registration tolerance: *
    o Vertical:
    ± 0.030 in. (± 0.75 mm) at print speeds at or below 4 ips on non-continuous media
    ± 0.060 in. (± 1.5 mm) at print speeds higher than 4 ips
    o Horizontal:
    ± 0.060 in. (± 1.5 mm)
  • Programmable print speeds (inches per second): 1.5, 2, 3, 4, 5, 6
  • Bar code modulus ―"X" dimension:
    o Picket fence (non-rotated) orientation: 1.6 mil to 16 mil
    o Ladder (rotated) orientation:
    1.6 mil to 16 mil



    Media and Ribbon Specifications
     
  • Media width (label and liner):
    0.79 in. (20 mm) to 4.5 in. (114 mm)
  • Minimum label length: See media specifications above.
  • Maximum full-width media thickness for cutter:
    0.23 mm (0.009 in.)
  • Ribbon width:
    0.79 in. (20 mm) to 4.33 in. (110 mm)

    General Specifications
     
  • Power consumption:
    o Idle = 20 W
    o Printing = 121 W (printing pause test label at lowest speed)
    o Standby = 25 W
  • Height: 15.5 in. (393.7 mm)
  • Width: 10.31 in. (261.9 mm)
  • Depth: 20.38 in. (517.5 mm)
  • Weight: 50 lbs. (22.7 kg)
  • UHF EPC Gen 2, Class 1/ISO 18000-6C compliant

* Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

 

Standard Printer Fonts

Fonts A through V are Expandable up to 10 times, height and width independently. Fonts E and H, however are not considered "in-spec" (OCR-A and OCR-B) when expanded.

The scalable smooth font 0 is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory. IBM Code Page 850 international character sets are available in fonts A through G, and 0 through software control.

Font Specifications (203dpi) 8 dot/mm

 Font Matrix (in dots) (H x W) Type† Min. Char. Size (H x W) in inches (mm) Max. CPI
A 9 x 5 U-L-D 0.044 x 0.029 (1.1 x 0.74) 33.9
B 11 x 7 U 0.054 x 0.044 (1.37 x 1.1) 22.6
C, D 18 x 10 U-L-D 0.088 x 0.059 (2.2 x 1.5) 16.9
E 28 x 15 OCR-B 0.138 x 0.098 (3.5 x 2.5) 10.1
F 26 x 13 U-L-D 0.128 x 0.079 (3.3 x 2.0) 12.7
G 60 x 40 U-L-D 0.295 x 0.236 (7.5 x 6.0) 4.2
H 21 x 13 OCR-A 0.103 x 0.093 (2.6 x 2.4) 10.7
GS 24 x 24 SYMBOL 0.118 x 0.118 (3.0 x 3.0) 8.4
P 20 x 18 U-L-D 0.098 x 0.089 (2.50 x 2.25) N/A
Q 28 x 24 U-L-D 0.138 x 0.113 (3.50 x 3.00) N/A
R 35 x 31 U-L-D 0.172 x 0.153 (4.38 x 3.88) N/A
S 40 x 35 U-L-D 0.197 x 0.172 (5.00 x 4.38) N/A
T 48 x 42 U-L-D 0.236 x 0.207 (6.00 x 5.25) N/A
U 59 x 53 U-L-D 0.290 x 0.261 (7.38 x 6.63) N/A
V 80 x 71 U-L-D 0.394 x 0.349 (10.0 x 8.88) N/A
Ø variable U-L-D variable N/A
U-Uppercase L-Lowercase D-Descenders

 

Font Specifications (300dpi) 12 dot/mm

Font Matrix (in dots) (H x W) Type† Min. Char. Size (H x W) in inches (mm) Max. CPI
A 9 x 5 U-L-D 0.030 x 0.020 (0.76 x 0.51) 50.0
B 11 x 7 U 0.037 x 0.030 (0.94 x 0.76) 33.3
C, D 18 x 10 U-L-D 0.060 x 0.040 (1.5 x 1.0) 25.0
E 41 x 20 OCR-B 0.137 x 0.087 (3.5 x 2.2) 11.5
F 26 x 13 U-L-D 0.087 x 0.053 (2.2 x 1.3) 18.8
G 60 x 40 U-L-D 0.200 x 0.160 (5.1 x 4.1) 6.3
H 30 x 19 OCR-A 0.100 x 0.093 (2.5 x 2.37) 10.7
GS 24 x 24 SYMBOL 0.080 x 0.080 (2.03 x 2.03) 12.5
P 20 x 18 U-L-D 0.067 x 0.060 (1.69 x 1.52) N/A
Q 28 x 24 U-L-D 0.093 x 0.080 (2.37 x 2.03) N/A
R 35 x 31 U-L-D 0.117 x 0.103 (2.96 x 2.62) N/A
S 40 x 35 U-L-D 0.133 x 0.117 (3.39 x 2.96) N/A
T 48 x 42 U-L-D 0.160 x 0.140 (4.06 x 3.56) N/A
U 59 x 53 U-L-D 0.197 x 0.177 (5.00 x 4.49) N/A
V 80 x 71 U-L-D 0.267 x 0.237 (6.77 x 6.01) N/A
Ø variable U-L-D variable N/A
U-Uppercase L-Lowercase D-Descender

 

Font Specifications (600dpi) 24 dot/mm

 Font Matrix (in dots) (H x W) Type† Min. Char. Size

(H x W) in inches (mm)

Max. CPI
A 9 x 5 U-L-D 0.015 x 0.010 (0.38 x 0.25) 100.0
B 11 x 7 U 0.018 x 0.015 (0.45 x 0.38) 66.7
C, D 18 x 10 U-L-D 0.030 x 0.020 (0.77 x 0.51) 50.0
E 82 x 40 OCR-B 0.137 x 0.087 (3.4 x 2.2) 11.54
F 26 x 13 U-L-D 0.043 x 0.027 (1.1 x 0.69) 37.5
G 60 x 40 U-L-D 0.100 x 0.080 (2.5 x 2.0) 12.5
H 60 x 38 OCR-A 0.100 x 0.093 (2.5 x 2.4) 10.71
GS 24 x 24 SYMBOL 0.040 x 0.040 (1.0 x 1.0) 25.0
P 20 x 18 U-L-D 0.033 x 0.030 (0.85 x 0.77) N/A
Q 28 x 24 U-L-D 0.047 x 0.040 (1.19 x 1.02) N/A
R 35 x 31 U-L-D 0.059 x 0.052 (1.49 x 1.32) N/A
S 40 x 35 U-L-D 0.067 x 0.059 (1.70 x 1.49) N/A
T 48 x 42 U-L-D 0.080 x 0.070 (2.04 x 1.79) N/A
U 59 x 53 U-L-D 0.099 x 0.089 (2.51 x 2.25) N/A
V 80 x 71 U-L-D 0.134 x 0.199 (3.40 x 3.02) N/A
Ø variable U-L-D variable N/A
†U-Uppercase L-Lowercase D-Descenders