140Xi4 Printer Specifications

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  5/3/2011

Xi4 Specifications in PDF Format

Specifications are provided for reference and are based on printer tests using Zebra brand ribbons and labels. Results may vary in actual application settings or when using other than recommended Zebra supplies. Zebra recommends always qualifying any application with thorough testing.

Xi4 Standard Features

Physical Features

Firmware

Optional Features

Printer Options

ZebraNet Print Server Options

Features provided by ZebraNet Print Servers include:
o Web View web pages - connect and control Zebra bar code printers via the printer's web interface using common internet browsers
o Alerts -provide alerts via any e-mail-enabled, wired, or wireless device to minimize downtime

Other Networking Options

Printer Operation

Firmware Options

ZebraLink Solutions

Media Specifications

* Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing

Ribbon Specifications

Electrical Specifications

Environmental Specifications

Font Specifications

Communications Specifications

Zebra Programming Language®

(ZPL and ZPL II)

Bar Code Symbologies and Specifications

140Xi4™ 203 dpi

Printing Specifications

  • 203 dpi resolution (8 dots/mm)
  • Dot size (W x L):
    0.0049 in. x 0.0049 in.
    (0.125 mm x 0.125 mm)
  • First dot location measured from inside media edge:
    0.10 in. ±0.035 in. (2.5mm ±0.9 mm)
  • Maximum print width:
    5.04 in. (128 mm)
  • Maximum non-continuous media print length (with 16 MB memory):
    39 in. (991 mm)
  • Maximum continuous media print length (with 16 MB memory):
    o 150 in. (3810 mm)
  • Media registration tolerance: *
    o Vertical:
    ± 0.030 in. (± 0.75 mm) at print speeds at or below 4 ips on noncontinuous media
    ± 0.060 in. (± 1.5 mm) at print speeds higher than 4 ips
    o Horizontal:
    ± 0.060 in. (± 1.5 mm)
  • Programmable print speeds (inches per second): 2.4, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
  • Bar code modulus ―"X" dimension:
    Picket fence (non-rotated) orientation:
    4.9 mil to 49 mil
    Ladder (rotated) orientation:
    4.9 mil to 49 mil


    Media and Ribbon Specifications Media width (label and liner):
    1.57 in. (40 mm) to 5.51 in. (140 mm)
  • Minimum label length: See media specifications above
  • Maximum full-width media thickness
    for cutter:
    0.23 mm (0.009 in.)
  • Ribbon width:
    1.57 in. (40 mm) to 5.1 in. (130 mm)

    General Specifications
     
  • TEC (Typical Electricity Consumption)
    2.860kWh@115V
    2.727kWh@230V
  • Power consumption:
    o Idle = 20 W
    o Printing = 180 W (printing pause test label at lowest speed)
    o Standby = 25 W
  • Height: 15.5 in. (393.7 mm)
  • Width: 11.31 in. (287.3 mm)
  • Depth: 20.38 in. (517.5 mm)
  • Weight: 55 lbs. (25.0 kg)
  • Printer dimension drawing Read More>>

* Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

Standard Printer Fonts

Fonts A through V are Expandable up to 10 times, height and width independently. Fonts E and H, however are not considered "in-spec" (OCR-A and OCR-B) when expanded.

The scalable smooth font 0 is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory. IBM Code Page 850 international character sets are available in fonts A through G, and 0 through software control.

Font Specifications (203dpi) 8 dot/mm

 Font

Matrix (in dots) (H x W)

Type†

Min. Char. Size (H x W) in inches (mm)

Max. CPI

A

9 x 5

U-L-D

0.044 x 0.029 (1.1 x 0.74)

33.9

B

11 x 7

U

0.054 x 0.044 (1.37 x 1.1)

22.6

C, D

18 x 10

U-L-D

0.088 x 0.059 (2.2 x 1.5)

16.9

E

28 x 15

OCR-B

0.138 x 0.098 (3.5 x 2.5)

10.1

F

26 x 13

U-L-D

0.128 x 0.079 (3.3 x 2.0)

12.7

G

60 x 40

U-L-D

0.295 x 0.236 (7.5 x 6.0)

4.2

H

21 x 13

OCR-A

0.103 x 0.093 (2.6 x 2.4)

10.7

GS

24 x 24

SYMBOL

0.118 x 0.118 (3.0 x 3.0)

8.4

P

20 x 18

U-L-D

0.098 x 0.089 (2.50 x 2.25)

N/A

Q

28 x 24

U-L-D

0.138 x 0.113 (3.50 x 3.00)

N/A

R

35 x 31

U-L-D

0.172 x 0.153 (4.38 x 3.88)

N/A

S

40 x 35

U-L-D

0.197 x 0.172 (5.00 x 4.38)

N/A

T

48 x 42

U-L-D

0.236 x 0.207 (6.00 x 5.25)

N/A

U

59 x 53

U-L-D

0.290 x 0.261 (7.38 x 6.63)

N/A

V

80 x 71

U-L-D

0.394 x 0.349 (10.0 x 8.88)

N/A

Ø

variable

U-L-D

variable

N/A

†U-Uppercase L-Lowercase D-Descenders