Standard Features
- Full function front panel and multilingual back-lit LCD display with user
programmable password protection
- Flash memory including
2.0MB non-volatile memory storage for downloadable
objects
- ZebraLink - the revolutionary real-time connectivity and control
solution
- WebView (requires optional ZebraNet ® PrintServer II)
- Alert (requires optional ZebraNet PrintServer II)
- Communications via serial RS-232 and bi-directional parallel port
with auto detect
- USB 2.0 (480 Mbits/second) port
- Thin film print head with E 3® Element Energy Control
- Thermal transfer and thermal direct printing of bar codes, text, and
graphics
- Dual media sensors, transmissive and reflective, selectable through
software or front panel
- ZPL ® or ZPL II ® programming language, selectable through software or
front panel
- 32 bit 133 Mhz RISC
processor
- 16 MB SDRAM memory, 12 MB
user-available, 4 MB non-volatile Flash memory
- Type I, II linear memory only up
to 32 MB and future availability of Type III Series PC Card Interface
- Simultaneous ATA-style PCMCIA and
Compact Flash (CF) memory card support up to 1 GB (current market availability) for additional
storage of fonts, graphics, logos, templates, and label formats or
preprogrammed with optional and international fonts. PCMCIA is externally
accessible and hot swappable. CF is internal.
- Clear media side door - easy monitoring of supplies usage without
opening the printer
- Zebra printer driver for Windows 3.X and 95/98/NT/2000 operating
systems
- Internal real-time clock
- Advanced label/media counters
- Auto calibration-printer
calibrates when printer is turned on or when printhead is closed with
approximately two labels
- Early Warning Systems-provide low
label, low ribbon, and clean printhead alerts via the front panel and
ZebraLink Alerts.
Optional Features
- ZebraNet PrintServer II - provides Ethernet connectivity and full use of
Zebranet Web View and Alert features
- ZebraNet Wireless Card
Socket-provides an internally integrated wireless option and supports
multiple third party LAN radio cards
- Clear media side bi-fold door - allows shorter media door opening radius
- Full-width rotary knife cutter and catch tray, operates under software
control cutting labels individually or in strips
Cutter Catch Tray Size 90 & 96: 3.54 wide x 10.50
long
140: 5.51 wide x 10.50 long
170: 7.10 wide x 10.50 long
220: 8.80 wide x 10.50 long
- Media rewind spindle - rewinds finished roll internally onto 3"
(76mm) core,
or enables label peel and liner rewind
- 3" (76mm) core enables label
peel and liner rewind
- RS-422/485 with
multidrop capability to network to multiple printers from a single host
with external adaptor P/N 33114M
- IBM ® Twinax interface - emulates IBM System 3X and AS/400 printers
- IBM Coax interface - emulates IBM System 3270 printers
- Applicator interface - provides status and control signals for applicators
and remote control devices
- Media supply spindle for 3"
(76mm) core or 40 mm core (in lieu of standard
hanger)
- Linear PCMCIA cards are available
8 MB and 32 MB
- ATA-style PCMCIA or Compact Flash
memory cards 16,
32, 64, 128, 256 MB
- Additional fonts available
-
64 MEG On-board Flash.
Suggested installation by ZASP's or factory.
-
48766-001 ZBI 2.0 Enablement Kit for
1
-
48767-001 ZBI 2.0 Enablement Kit for 5
-
48768-001 ZBI 2.0 Enablement Kit for 25
-
13831-001 ZebraDesigner Pro
-
13832-001 ZebraDesigner for mySAP Business Suite
-
13833-001 ZebraDesigner for XML
-
48733-120 ZebraNet Bridge Enterprise for 1-50 Printers
-
48734-120 ZebraNet Bridge Enterprise for 1-100 Printers
- 48735-120 ZebraNet Bridge Enterprise for 100+ Printers
140XiIIIPlus Field Installable Kits |
Part Number |
External ZebraNet PrintServer II (10Base-T) |
G46692 |
Internal ZebraNet PrintServer II (10Base-T) |
G46689 |
External
ZebraNet 10/100 Print Server |
G47490 |
Internal
ZebraNet 10/100 Print Server |
G47480 |
ZebraNet Wireless Plus Internal Print Server |
29652-002M |
ZebraNet Wireless Plus Print Server |
|
ZebraNet
Wireless Print Server (N/A) |
G79094 |
Cutter |
48353 |
Cutter Catch Tray
Cutter Catch Tray Size 90 & 96: 3.54 wide x
10.50 long
140: 5.51 wide x 10.50 long
170: 7.10 wide x 10.50 long
220: 8.80 wide x 10.50 long |
48459 |
Cutter/Rewind field install kit |
48154 |
Rewind Option Field Install Kit |
48355 |
Internal Fan-Fold Media Supply Bin (Not Compatible with
Rewind or Peel Options) |
40276 |
Twinax Interface |
G48924 |
Coax Interface |
G48925 |
Applicator Port |
49726M |
USB Cable (15 foot long) |
33011 |
Optional
RS422/RS485 adapter |
33114M |
Optional RS232 DB9
to DB25 adapter |
33138 |
RS485 Network w/Stand, DIN
Converter Kit |
46790 |
RS485 Network w/Mini-DIN Converter
Kit |
46890 |
RS485 Y-Connection Cable for
Printer-to-Printer |
46485 |
8
Meg PCMCIA Flash Memory Card (Linear Card) |
46999-0008 |
32
Meg PCMCIA Flash Memory Card (ATA Card)
Discontinued part |
33194-032
|
64
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-064 |
128
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-128 |
256
Meg PCMCIA Flash Memory Card (ATA Card) |
33194-256 |
32 Meg
CompactFlash Memory Card |
33193-032 |
64 Meg
CompactFlash Memory Card |
33193-064 |
128 Meg
CompactFlash Memory Card |
33193-128 |
256 Meg
CompactFlash Memory Card |
33193-256 |
Media Supply Spindle 3 inch |
48253M |
Media Supply Spindle 40mm |
48044M |
Maintenance Packing Kits |
48311PM |
Preventative
Maintenance Kit |
47363 |
Parts List
(Click Here)
Printing Specifications
- 203 dpi resolution (8 dots/mm)
- Dot size (W x L):0.0049" x
0.0049" (0.125mm x 0.125mm)
- First dot location measured from inside media edge:
-
0.10" +/-0.035" (2.5mm +/-0.9mm)
- Maximum print width: 5.04"
(128mm)
- Maximum non-continuous media print length:
-
16MB memory = 39" (991mm)
- Maximum continuous media print length:
-
16MB memory = 150" (3810mm)
- Media registration tolerance:
-
*Vertical = < +/-0.070" (+/-1.8mm) on non-continuous media
-
Horizontal = < +/-0.070" (+/-1.8mm)
- Programmable print speeds:
-
2.4" (61mm), 3" (76mm) through 12"(305mm) per second in
1" (25mm) increments
- Bar code modulus "X" dimension:
-
Picket fence (non-rotated) orientation = 4.9 mil to 49 mil
-
Ladder (rotated) orientation = 4.9 mil to 49 mil
*Media registration and minimum label
length are affected by media type and width, ribbon type, and print speed.
Performance improves as these
factors are optimized. Zebra recommends always qualifying any application with
thorough testing.
Media Specifications
- Media type: continuous, die-cut, or black mark
- Media width (label and liner)
1.57" (40mm) to 5.51" (140mm)
- Minimum label length: *
-
Rewind mode: 0.25" (6mm)
-
Peel mode: 0.5" (13mm)
-
Tear-off mode: 0.7" (18mm)
-
Cutter mode: 1.5" (38mm)
- Maximum label length: scroll up this page to Printing
Specifications for max length and other printing spec info
- Media thickness (label and liner):
-
0.003" (0.076mm) to 0.012" (0.305mm)
- Maximum full-width media thickness
for cutter:
0.23 mm (0.009")
- Maximum media roll size:
-
8.0" (203mm) O.D. on a 3" (76mm) I.D. core
- Transmissive (gap) sensing standards:
- Interlabel gap: 2 - 4mm, preferably 3mm
- Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)
- Sensing hole: 0.125" (3mm) diameter
- Reflective (black mark) sensing standards:
- Black mark length (parallel to inside media edge): 0.12" - 0.43"
(3 - 11mm)
- Black mark width (perpendicular to inside media edge): 0.43" (>
11mm)
- Black mark location: within 0.040" (1mm) of inside media edge:
- Black mark density: >1.0 Optical Density Units (ODU)
- Maximum media density: 0.5 ODU
*Media registration and minimum label
length are affected by media type and width, ribbon type, and print speed.
Performance improves as these
factors are optimized. Zebra recommends always qualifying any application with
thorough testing.
Ribbon Specifications
- Ribbon width: 1.57" (40mm) to
5.1" (130mm)
- Standard Lengths: 1476' (450m) or 984' (300m)
-
Provides 2:1 and 3:1 media roll to ribbon ratios
- Maximum ribbon roll size:
-
3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core
- Ribbon wound coated-side out
Font Specifications
- Bitmap fonts A through H and GS symbols are expandable up to 10 times,
height and width independent
- Smooth scalable font Ø (CG Triumvirate Bold Condensed) is expandable
dot-by-dot, height and width independent
- IBM Code Page 850 International Characters
Fonts |
Matrix in dots HxW |
Type |
Minimum Character Size
HxW |
Maximum C.P.I. |
A |
9x5 |
U-L-D |
.044"x.029" |
33.9 |
B |
11x7 |
U |
.054"x.044" |
22.6 |
C,D |
18x10 |
U-L-D |
.088"x.059" |
16.9 |
E |
41x20 |
OCR-B |
.138"x.098" |
10.1 |
F |
26x13 |
U-L-D |
.128"x.079" |
12.7 |
G |
60x40 |
U-L-D |
.295"x.236" |
4.2 |
H |
30x19 |
OCR-A |
.103"x.093" |
10.7 |
GS |
24x24 |
SYMBOL |
.118"x.118" |
8.4 |
Ø |
variable |
U-L-D |
variable |
N/A |
U - Uppercase L - Lowercase D - Descenders
Bar Code Symbologies
& Specifications
Bar code ratios: 2:1, 7:3, 5:2, and 3:1
Linear bar codes: Code11, Code 39, Code 93, Code 128 with
subsets A/B/C and UCC Case Codes, ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC and
EAN 2 or 5 digit extensions, Plessey, Postnet, Standard 2 of 5, Industrial 2 of
5, Interleaved 2 of 5, LOGMARS, MSI, Codabar, Planet Code
2-dimensional bar codes: Codablock, PDF-417, Code 49,
DataMatrix, Maxi Code, QR Code, RSS Composite and TLC 39
Zebra Programming Language
® (ZPL ® and ZPL II ®
)
- Communicates in printable ASCII characters
- Compatible with mainframe, mini, and PC hosts
- Downloadable objects include graphics, scalable and bitmap fonts, label
templates and formats
- Object copying between memory
areas (RAM and PC memory card)
- Adjustable print cache (^COY)
- Data compression
- Automatic memory allocation for format while printing
- Automatic serialization of fields (^SN and ^SF)
- Format inversion (white on black) (^FR and ^LR)
- Mirror-image printing (^PM)
- Four position field rotation (0°, 90°, 180°, 270°) (^FW)
- Slew command (^PF and ^PH)
- Programmable label quantities with print, pause, cut control (^PQ)
- User programmable password (^KP)
- Status messages to host upon
request (~HS)
- ZBI (Zebra BASIC Interpreter)
- Interpreting program module that sits between the communication ports
and the ZPLII processing engine
- Can be used to convert non-ZPL printer programming language to ZPL
commands
- Direct interface to peripheral devices such as bar-code scanners,
weight scales, and keyboards
- Based on ANSI BASIC computer language
Communications Specifications
- USB 2.0 (480 Mbits/second) port
- High-speed bi-directional parallel interface,
IEEE 1284-1994 compatibility, nibble
mode.
Supports ECP starting at firmware version 42.12.0.
- High-speed serial interfaces:
- RS-232C with
DB9F connector, optional converter for DB25F available
- Optional RS-422/485 with
multidrop capability to network to multiple printers from a single host
with external adaptor P/N 33114M
- Configurable baud rate (110 - 115.2kB), parity, data bits, and stop bits
- Software (XON/XOFF) or hardware (DTR/DSR) communication handshake
protocols
- IBM ® Twinax interface - emulates IBM System 3X and AS/400 printers
- IBM Coax interface - emulates IBM System 3270 printers
- Applicator interface with DB15F connector (Option)
Electrical Specifications
- Universal power supply with power-factor correction 90-264VAC, 48-62 Hz
- Agency approvals: Bi-National UL 60950 3 rd edition/CSA CAN/CSA-C22.2 No.
60950-00 Third Edition; IEC 950/EN60950: 1992 W/amendments 1 thru 4 (CB
Scheme); EN55022: 1998 Class B; EN55024: 1998; EN61000-3-2,3 W/amendment
A12; Canadian ICES-003, Class B; FCC Class B; Argentina 92/98 Phase 3;
Australia AS/NZS 3548; R.O.C. CNS 13438
Model |
Inrush |
Idle |
Printing |
140XiIII Plus |
2.9
Arms/ 1 cyc |
18.2
W |
179.6
W |
|
|
22.7
VA |
188.3
VA |
- Inrush is the
RMS value of the first positive and negative current pulse at turn on at
120V, 60 Hz.
- Idle is power in
standby mode after power-up sequence is over, at 120V 60 Hz.
- Printing is the
peak power used during printing of the Pause Test label at speed A and
120Vac, 6
Environmental Specifications
- Operating environment:
-
Thermal transfer = 41° to 104°F (5° to 40°C)
-
Thermal direct = 32° to 104°F (0° to 40°C)
-
20% to 85% non-condensing R.H
- Storage/Transportation environment:
- -40° to 140°F (-40° to 60°C)
- 5% to 85% non-condensing R.H.
General
Specifications
- Power consumption:
-
Idle = 19W
-
Printing = 180W (printing pause test label at lowest speed)
-
Standby = 25W
- Height: 15.5" (393.7mm)
- Width: 11.15" (283.2mm)
- Depth: 19.5" (495.3mm)
- Weight: 55lbs. (25.0 kg)