Format Prefix Change

1:  Press the SETUP/EXIT key once
2:  Press the NEXT/SAVE key until FORMAT PREFIX shows in the LCD
3:  Use the (-) key to move the cursor under the value you wish to change.
4:  Use the (-) key to increase the value.
5:  After adjusting the width to the desired value, exit the setup program by pressing the SETUP/EXIT Key once
6:  Save the changes by pressing the NEXT/SAVE Key when SAVE PERMANENT is displayed in the LCD.
7:  If SAVE PERMANENT is not displayed in the LCD press the (+) or (-) Key until it is displayed