S4M ZPL LCD Display Menu List 

 

Topic or Information

S4M ZPL LCD Display Menu List 

ZPL Front Panel Display Details

Applies To

S4M using V58 Firmware  

Details

 

S4M (ZPL Model)
Menu

Menu Item Options Default
Setting
ZPL Command Option
Description
Password

Password Level 1 and 2 menu (no password needed)

PRINTER READY
V50.X.X

DARKNESS
10.0
0-30 10.0 ~SD  
^MD
Read More>
Burn time

None

TEAROFF
0
-120 - +120 0 ^TA
Read More>
Dot rows away
from tearoff bar
LABELTOP
0
-120 - +120 0 ^LT
Read More>
Defines top 
margin of label
LEFT POSITION
0
-9999 - +9999 (- moves right and + moves left) 0 ^LS
Read More>
Defines horizontal position on label
MEDIA TYPE
GAP/NOTCH
GAP/NOTCH GAP/NOTCH ^MNM
^MNN & ^LL
^MNY ^MNW
Read More>

^JS 
Read More>
 

Chooses which 
sensor is used, 
also what type of
label is loaded
CONTINUOUS
MARK
SENSOR SELECT
REFLECTIVE
REFLECTIVE REFLECTIVE Refers to Media Type - The Reflective Sensor is compatible with Mark and Gap Notch.
Use Transmissive if the Reflecive Sensor is not functioning as expected
TRANSMISSIVE
REMOVAL
TEAR
TEAR TEAR ^MMT
Read More>
 

 

What label presentation mode do you
want the printer to operate in

REWIND ^MMR
Read More>
DELAYED CUT ^MMD
Read More>
CUTTER ^MMC
Read More>
PEEL ^MMP
Read More>
PRINT SPEED
2 IPS
2, 3, 4, 5, 6 IPS 2 IPS ^PR
Read More>
 
Print rate while 
printing
PRINT WIDTH
832 
(1248 on 300 dpi)
2-832 on 203 dpi
2-1248 on 300 dpi
832 on 203 dpi
1248 on 300 dpi
^PW
Read More>
Print width should 
be set at least as 
wide as the labels
in dots
LENGTH
AUTO
AUTO AUTO ^ML
Read More>
Used in conjunction
with calibration
1-39"

Password Level 3 menu (password = 1234)

ADVANCED 
SETUP 3

enter password 1234 <enter> to see next set of menu items

1234

 

PRINT OUT
SETTINGS

 

SETTINGS SETTINGS ~WC
Read More>
Prints a config
NETWORK   ~WL
Read More>
Prints a network config
IMAGES   ^WD*:*.GRF  .BMP  .PNG
Read More>
List resident images
ALL   NA Prints all these lists
BARCODES   ^WD*:*.BAR
Read More>
Lists resident barcodes
FORMATS   ^WD*:*.ZPL
Read More>
Lists resident formats
FONTS   ^WD*:*.FNT   .TTF
Read More>
Lists resident fonts
PARALLEL COMM
BIDIRECTIONAL
BIDIRECTIONAL BIDIRECTIONAL    
UNIDIRECTIONAL
BAUD
9600
300, 600, 1200, 2400
4800, 9600, 14400
19200, 28800, 38400,
57600, 115200
9600 ^SC
Read More>
Baud rate of the printers serial port
DATA BITS
8 BITS
8 BITS 8 BITS Data bit setting of the serial port
7 BITS
PARITY
NONE
NONE NONE Parity setting of the serial port
EVEN
ODD
HOST HANDSHAKE
XON/XOFF
XON/XOFF XON/XOFF Handshake setting of the serial port
RTS/CTS
DSR/DTR
OBTAIN*
IP ADDRESS
PERMANENT PERMANENT   * This menu item will not be present if wired/wireless znet option is not installed and must have a live network connection
AUTOSELECT
CHANGE*
IP ADDRESS
address will display after enter button is pressed     * This menu item will not be present if  wired/wireless znet option is not installed and must have a live network connection
CHANGE*
SUBNET
subnet will display after enter button is pressed      * This menu item will not be present if  wired/wireless znet option is not installed and must have a live network connection
CHANGE*
GATEWAY
gateway will display after enter button is pressed     * This menu item will not be present if  wired/wireless znet option is not installed and must have a live network connection
CONTROL CHAR
7E
Any hex value on code page ~ (tilde) ^CT ~CT
Read More>
Change control prefix
COMMAND CHAR
5E  ^
Any hex value on code page ^ (Caret) ^CC ~CC
Read More>
Change the format prefix
DELIM. CHAR
2E  ,
Any hex value on code page , (comma) ^CD ~CD
Read More>
Change the delimiter prefix
HEXDUMP
NO
NO NO ~JE
Read More>
Normal printing mode
YES   ~JD
Read More>
Enable hex dump print mode
Reprint Mode
Disabled
Enabled,Disabled Disabled ~PR/^JJ
Read More>
Used to reprint the last label
CHANGE RTC DATE* hitting enter shows date     * This menu item will not be 
present if RTC option is not installed
CHANGE RTC TIME* hitting enter shows time     * This menu item will not be 
present if RTC option is not installed
LOAD
DEFAULTS
If you press the enter button at  this point you'll be prompted

ARE YOU SURE? 
YES
  ^JUF
Read More>
Printer can be defaulted by hitting the
ENTER button when the prompt reads:
ARE YOU SURE?
YES
Default Net If you press the enter button at 
this point you'll be prompted
 
ARE YOU SURE?
YES
  ^JUN
Read More>
 
INITIALIZE FLASH MEM
YES
If you press the enter button at 
this point you'll be prompted 

ARE YOU SURE?
YES
  ^JBE
Read More>
E: flash memory can be initialized 
by hitting the ENTER button when 
the prompt reads:
ARE YOU SURE?
YES
RIBBON
YES
YES YES ^MTT Setting for thermal transfer or direct 
thermal
NO ^MTD
Read More>
ZPL OVERRIDE
YES
YES YES   YES = ZPL will override ^MM, ^MN, ^MT
settings set in the printers display menu.
NO NO  = ZPL will not override ^MM, ^MN, ^MT 
settings set in the printers display menu.
SENSOR
PROFILE
If you press the enter button at 
this point a sensor profile will print
    The printed profile can be used to
to troubleshoot calibration problems
MEDIA/RIBBON
CALIBRATE
      Performs manual calibration
LANGUAGE
ENGLISH
ENGLISH
JAPANESE
SUOMI
NEDERLANDS
ESPANOL2
DANSK
SVENSKA
PORTUGAL
NORSK
ITALIANO
DEUTSCH
FRENCH
ESPANOL
ENGLISH ^KL
Read More>
Selects the language for the display

Password Level 4 menu (password = 9999)

ADVANCED 
SETUP 4

enter password 9999 <enter> to see next set of menu items

9999

 

LABEL LEVEL
13
  50    
PAPER OUT
64
  0    
PAPER GAIN
10
  calibrated value    
RIBBON OUT
55
  calibrated value    
RIBBON GAIN
26
  calibrated value    
TAKE LABEL*
66
      *appears in display if take label option is installed (Peel Option)
MEDIA POWER U
CALIBRATION
CALIBRATION CALIBRATION ^MFC
Read More>
Autocalibrates
FEED   ^MFF
Read More>
Feeds to first web after sensor
NO MOTION   ^MFN
Read More>
No media feed
SHORT CAL     Cals label length using current sensor settings
LENGTH   ^MFL
Read More>
Cals based on last label length setting
MEDIA HEAD CLOSE
CALIBRATION
CALIBRATION CALIBRATION ^MFx,C
Read More>
Autocalibrates
FEED   ^MFx,F Feeds to first web after sensor
NO MOTION   ^MFx,N
Read More>
No media feed
SHORT CAL     Cals label length using current sensor settings
LENGTH   ^MFx,L
Read More>
Cals based on last label length setting
LANGUAGE 
ENGLISH
       
DARKNESS
10
       
Additional  Items for V50.15 and the Wireless Plus Print Server:        
*MAC ADDRESS

 

N/A

 

Default Value:000000000000

 

 

Each wireless radio card has a permanent and unique Media Access Control (MAC) address assigned to it. This parameter shows the MAC address for the current wireless radio card.

*ESSID

 

N/A 125 ^WS
Read More>>

This parameter shows the ESSID for the current wireless configuration.

*WLAN SECURITY

 

N/A N/A ^WX
Read More>>
This parameter displays the current security type

 

RESET NETWORK

 

N/A N/A ~WR
Read More>>

Use this parameter to reinitialize the wireless radio card and the print server (wired or wireless) when the wireless print server is running. This parameter also causes any wireless radio card in the printer to re-associate to the wireless network.

This parameter appear after the system recognizes the existence of a ZebraNet print server (wired or wireless).

 

* Appears only when the ZebraNet Wireless Plus Print Server is installed and there is a live network connection.  If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.

Additional Information

S4M User Guide Read More>>