ZEBRA RZ400 PRINTER SPECIFICATIONS

Specifications are provided for reference and are based on printer tests using Zebra brand ribbons and labels. Results may vary in actual application settings or when using other than recommended Zebra supplies. Zebra recommends always qualifying any application with thorough testing.

Standard Features

Optional Features

          -A front mount, passive peel option without take-up spindle.

          -Liner-Take-Up Option – Full roll liner take-up spindle accommodates standard printer base - works with peel option.

 ZebraLink Solutions

Software

Firmware

ZPL II - Universal language for Zebra printers. Simplifies label formatting and enables format compatibility with existing systems that run Zebra printers.

  1. Web View - Connect and control Zebra bar code printers via the printer’s Web interface using a common Web browser.

  2. Alert - Printers equipped with ZebraNet print servers provide alerts via any email-enabled, wired, or wireless device to minimize downtime.

XML- Enabled printing –direct connect integration for bar code label printing, eliminates license fees and printer server hardware and lowers customization and programming costs. .

 

 

Field installable options

RZ400

External ZebraNet Print Server II, (Ethernet) - disables parallel port G46692
Internal ZebraNet 10/100 Print Server, (Ethernet) 79823
External ZebraNet 10/100 Print Server, (Ethernet) - disables parallel port
Wireless Print Server Plus Internal Print Server 29652-006M
Wireless Print Server Plus Print Server 29651-006M
Serial Port Converter: RS232 to RS485/422 33130
Serial Port Converter: DB9 to DB25 33138
Cutter / Catch Tray 79841
Peel- front mount, passive peel option, NO take-up spindle 79831M
Liner take-up spindle ONLY 79868M
Liner take-up and peel front mount option combined (requires order of both 79831M and 79868M) 79831M, 79868M
Rewind - internally rewinds full roll on 3" core (includes peel option and deep base - not compatible with cutter option) 79835
300 dpi print head  79801M
203 dpi print head  79800M
300dpi to 203 dpi convert kit 79805
203dpi to 300 dpi convert kit 79806

 

 

Printing Specifications

   

203 dpi

300 dpi

157"

3988mm

73"

1869mm

 

 

Media registration tolerance:

       - 203 dpi = 2.4" (61mm), 3" (76mm) through 10" (254mm) per second in 1" increments

       - 300 dpi = 2.4" (61mm), 3" (76mm) through 8" (203mm) per second in 1" increments

Media Specifications

          1.0" (25.4mm) to 4.50" (114mm) Tear

          1.0" (25.4mm) to 4.25" (108mm) Peel / Rewind

          0.5" (12.7mm)in Tear, Peel and Rewind Mode

          1.0" (25.4mm) in Cutter Mode

          0.0023" (0.058mm) to 0.010" (0.25mm)

          8.0" (203mm) O.D. on a 3" (76mm) I.D. core

          8.0"L (203mm) x 4.5"W (114mm) x 6.2"H (157mm)

          - Inter-label gap: 2 - 4mm, preferably 3mm

            *Note: Notch & Hole Position centered from 0.15" to 2.25" from media inner edge

Ribbon Specifications

Standard Printer Fonts

Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10 times, height and width independently. However, fonts E and H (OCR-A and OCR-B) are not considered "in-spec" when expanded. The scalable smooth font 0 (CG Triumvirate Bold Condensed) is expandable on a dot-by-dot basis, height and width independent, while maintaining smooth edges. Maximum character size depends on available memory. IBM Code Page 850 international character sets are available in the fonts A, B, C, D, E, F, G, and 0 through software control.

 

 

Bar Code Symbologies & Specifications

Bar code modulus "X" dimension:

-Picket fence (non-rotated) orientation:

203 dpi = 4.9 mil to 49 mil

300 dpi = 3.3 mil to 33 mil

 

-Ladder (rotated) orientation:

203 dpi = 4.9 mil to 49 mil

300 dpi = 3.9 mil to 39 mil

Bar-Code ratios - 2:1 to 3:1 in supported symbologies

Zebra Programming Language: (ZPL and ZPL II)

 

Communications Specifications:

    1. Software (XON/XOFF), hardware (DTR/DSR, or RTS/CTS) communication handshake protocols

    2. RS422/485 with optional adapter.

Electrical Specifications

Physical Specifications

Environmental Specifications

          Thermal transfer = 40 to 104F (5 to 40C)

          Thermal direct = 32 to 104F (0 to 40C)

          20% to 85% non-condensing R.H.

        -40 to 140F (-40 to 60C)

         5% to 85% non-condensing R.H.