G Series Desktop Adjusting the Print Width

Print width may need to be adjusted when:

  • You are using the printer for the first time without a software application/driver that will do this automatically.

  • There is a change in media width and you are not using a software application or driver.

  • The image is shifted in the horizontal direction on the label (i.e.Left or Right viewed from the front of the printer)

Print width may be set by :

  •  The Windows printer driver or application software such as Zebra Designer.

  •  The five-flash sequence in Feed Button Modes. Read More>>

  • Controlling printer operations with ZPL programming; refer to the Print Width (^PW) command Read More>>

  • Controlling printer operations with EPL Page Mode programming, refer to the Set Label Width (q) command Read More>>