RISC 6000 serial communications configuration to a Zebra Printer
UNIX setup in SMIT
Uses communications parameters of 19,200 Baud, 7 data bits, even parity, 1 stop bit and either DTR or Xon-Xoff flow control.
printer/plotter | lp6 and lp8 |
printer/plotter type | osp |
printer/plotter interface | rs232 |
description | other serial printer |
status | available |
location | 00-05-11-04 & -06 |
parent adapter | sa2 |
port# | 4 & 6 |
use alternate RJ-45 pinouts | 19200 |
PARITY | even |
BITS per character | 7 |
STOP BITS | 1 |
XON-XOFF handshaking | yes |
use DTR command protocol | yes |
TRANSMIT buffer count | 4 |
printer TIME OUT period | 60 |
STATE at boot time | available |
LINES per page | 66 |
COLUMNS per page | 198 |
columns to INDENT | 0 |
send all characters UNMODIFIED | no |
send BACKSPACES | yes |
send FORM FEEDS | yes |
send CARRIAGE RETURNS | yes |
send LINE FEEDS | yes |
add CARRIAGE RETURNS to LINE FEEDS | yes |
convert lower case to UPPER CASE | no |
EXPAND TABS on 8-position bounderies | yes |
return on ERROR | no |