Twinax Coax Option

Determine if support is needed for the older Twinax / Coax option or if support is needed for the newer version of the Twinax / Coax option.

  older Original kit 48924 and 48925 were options for these models New Kit

G48924 and G48925 can be ordered for these models

Twinax 48924  no longer available for order 105SL, XiII, XiIII, XiIIIplus, and R-140, PAX2, PAX3 G48924 105SL, XiII, XiIII, XiIIIplus, and R-140
Coax 48925  no longer available for order 105SL, XiII, XiIII, XiIIIplus, and R-140, PAX2, PAX3 G48925 105SL, XiII, XiIII, XiIIIplus, and R-140

Information for the older Twinax / Coax options (48924 and 48925)
48924 Twinax:
Dip switches on back panel
Twinax User Guide
48925 Coax:
Dip switches on back panel
Coax User Guide

 

 

Photos and information for the new version of the Twinax / Coax options (G48924 and G48925)

Internal information link

Photos:

make sure red stripe
on ribbon cable is at bottom
Coax Adapter Twinax Adapter Rotary Switch

 

do not change
the dip switches
Twinax Selftest Coax Selftest LCD menu

Important note: The G48924 and G48925 kits do not fit into PAX printers and therefore are not supported in PAX printers. We will continue to provide technical support for the 48924 and 48925 but they can no longer be ordered. Replacement twinax or coax option boards are not available for PAX printers.

The main difference between the original cards and the new cards is that the new cards do not have dip switches on the back panel. The new cards have a single multi-position rotary switch on the back panel.

Click here to see the full user guide which explains how to install the card, set languages and other info.

Quick setup guide:

Twinax

Coax

Printing a Twinax/Coax Self test label

Defaulting the Twinax/Coax card