KDU setup
There are two types of KDU's. One has a RJ45 connector for use with the EPL portable printers such as the Transport or Xport. The second has a 9 pin serial connector for use with the desktop EPL printers with a serial port available.
The printer communication settings must be set to 9600 Baud, No Parity, 8 data bits, 1 stop bit. The KDU has an auxiliary port for connecting items such as scanners or scales. This device must be set to 4800 Baud, Odd Parity, 8 data bits, 1 stop bit.
For G Series Printers there is a adapter for the KDU Part #105850-026.
The KDU cannot send EPL to the printer. It is only capable of entering basic text in response to prompts from the printer. The format below is a simple example of a label format that can be downloaded to the printer. It will prompt the KDU for information to complete variable fields in the format.
Example for a 1" h x 4"w label:
FK"ADDRESS"
FS"ADDRESS"
V00,30,N,"Name"
V01,30,N,"Address"
V02,20,N,"City"
V03,2,N,"State"
V04,10,N,"Zip"
A69,22,0,4,1,1,N,V00
A71,75,0,4,1,1,N,V01
A71,130,0,4,1,1,N,V02
A404,130,0,4,1,1,N,V03
A445,128,0,4,1,1,N,V04
FE
Troubleshooting:
Connecting a Scale or Scanner, click here.