Cleaning the Print head
After allowing the print head to cool for approximately one
minute, use 90% isopropyl alcohol on a cotton swab to clean the print elements
from end to end (the print elements are located in the dark line on the print
head). NOTE: You do not have to turn off the printer to do this.
If print quality has not improved after performing this procedure, try cleaning
the print head with Save-a-Print head cleaning film Zebra P/N
46902. This
specially coated material removes contamination buildup without damaging the
print head. Call your authorized reseller for more information.
Click here for Pens and Kit information