ZEBRA
LP/TLP 2824 PLUS PRINTER SPECIFICATIONS
Specifications are provided for reference and are based on printer tests using
Zebra brand ribbons and labels. Results may vary in actual application settings
or when using other than recommended Zebra supplies. Zebra recommends always
qualifying any application with thorough testing.
Standard Features
OpenACCESS design for easy media
loading
Direct thermal (LP) and thermal
transfer (TLP) printing of bar codes,
text, and graphics
Fully enclosed 5.0" (127mm) media
compartment
Double-walled ABS case construction
EPL and ZPL programming language,
co-resident
32-bit RISC processor
8 MB SDRAM, 4 MB Flash memory
Zebra E3 printhead energy control
Interfaces available: Serial
(RS232) with auto-sensing port, USB
(V1.1), and Parallel (Centronics)
Odometer for printer length
tracking
Unicode
compliant for multi-language
printing
Reset button feature
Auto-calibration of media
16 resident expandable ZPL II
bitmap fonts
One resident scalable ZPL font
5 resident expandable EPL2 fonts
Auto-switching 100V and 240V power
supply
Linear & 2-D bar code symbologies
Transmissive and reflective media
sensing
Head-up sensor
Standard tear-off mode feature
Certified Microsoft Windows
drivers
Optional Features
Factory Only:
64 MB Flash Memory
w/ Real
Time Clock for a total of 68MB
Ethernet
10/100 -
Internal
Ethernet, offered in combination with USB
Label
Dispenser -
label peel
and present with label taken sensor
Cutter
- may be used on the
following media types with a maximum thickness of 0.007" (0.18mm) and minimum
label length of 1.0" (25.4mm)
Continuous Paper
-
most
receipt or fax paper is generally acceptable
Label
Liner -
cuts on the
liner only. Cutter should not be used to cut through labels as adhesives may
cause jams
Tag
Stock -
tag stock is
generally acceptable as long as it is no more than 0.07" (0.18mm) thickness
Liner-free platen (LP only)
- for use with liner-free media
ZBI 2.0
- field upgradeable
Accessories |
|
120181-005G |
Keyboard Display Unit (KDU) |
120182G-001 |
KDU Plus |
105829-001 |
Media Adapter Guide Kit for 2" desktop printers |
Connectivity Kits |
|
P1031031 |
External ZebraNet 10/100 Print Server (compatible with 2824
parallel port models) |
105850-006 |
USB Interface Cable 6' (A to B) |
G105850-007 |
USB Interface Cable 10' (A to B) |
G105950-054 |
Serial Interface Cable - 6' (DB-9 to DB-9) Null Modem |
105850-001 |
Parallel Interface Cable - 6' (Centronics) |
105850-002 |
Parallel Interface Cable - 10' (Centronics) |
Power supplies and power cord kits |
|
105950-060 |
Power supply with USA, Europe cords |
105950-061 |
Power Cord, 120V US C13 (set of 5) |
105950-062 |
Power Cord, 220V Euro C13 (set of 5) |
105950-063 |
Power Cord, 240V UK,C13 (set of 5) |
105950-064 |
Power Cord, 240V AUS C13 (set of 5) |
105950-065 |
China power cord 220V (set of 5) |
105950-066 |
Argentina power cord 220V (set of 5) |
105950-085 |
Argentina power supply, C5, 10-240V |
Font Kits |
|
77840 |
Five Asian Bitmap Flash Font Pack |
77842 |
Over 20 Smooth Scalable Font Pack |
77844 |
Korean HY Gothic Hangul Smooth Scalable Font |
77845 |
Thai Angsana Smooth Scalable Font |
77846 |
Simplified Chinese Monotype Sung Smooth Scalable Font |
77847 |
Traditional Chinese Monotype Kai Smooth Scalable Font |
77848 |
Japanese HGP Gothic B Smooth Scalable Font |
Desktop Printheads |
|
G105910-102 |
Printhead Assembly, LP2824, LP2824-Z (203 dpi) |
G105910-148 |
Printhead Assembly, TLP2824, TLP2824-Z (203 dpi) |
|
|
ZebraLink Solutions
Software:
- Windows
utility drivers to setup and configure your Zebra printer
Zebra
Designer
- offers basic features for simple label design
Zebra
Designer
Pro - an intuitive, easy-to-use software program for
creating complex label designs (option)
ZebraNet Bridge Enterprise
- centrally manage Zebra printers from a single
PC screen anywhere on your global network (standard and option)
ZebraNet Utilities v 7.0
- provides enhanced printing, conversion, and
administration capabilities; message management and more (standard)
Zebra
Designer Driver
- the most powerful driver available from Zebra Windows
drivers (standard)
ZBI 2.0
- Powerful programming language that lets printers run standalone
applications, connect to peripherals, and much more (option)
ZBI-Developer
Programming utility makes it dramatically easier for programmers to create
and test complex ZBI 2.0 programs and distribute them to the printer (standard
with ZBI 2.0)
Programming Languages
- Universal language for Zebra
printers. Simplifies label formatting and enables format compatibility with
existing systems that run Zebra printers
EPL2
- Eltron Programming Language simplifies label formatting and enables format
compatibility with legacy applications
EPL
- Line Mode support (LP 2824 Plus) enables format compatibility with legacy
applications
Printing Specifications
Resolution: 203 dots/inch (dpi) (8
dots/mm)
Dot Pitch: 0.0049" (0.125mm)
Maximum print length: 39.0" (991mm)
Minimum print length: 0.005"
(0.125mm - one dot)
Maximum print width: 2.2" (56mm)
Minimum print width: 0.005"
(0.125mm - one dot)
Programmable print speed: 2, 3, 4
ips (51,76 and 102mm/s)
Bar code modulus
"X" dimension:
5mil to 50 mil
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE July
29, 2009, 2824 Plus ZIH Corp 2009
Ribbon
Specifications (TLP model)
NOTE:
For optimum print quality and printer performance, use of Zebra genuine ribbon
is recommended as well as a notched ribbon core.
Ribbon Width: 1.33" (33.8mm) to
2.24" (58mm)
Ribbon Capacity: 1 roll of 5" OD
media full ribbon capacity
Core ID: 0.5" (12.7mm)
Ribbon OD: 1.36" (35mm)
Ribbon Length: 244' (74m) using
0.000328" ribbon thickness
Ribbon Type: wax, wax/resin and
resin
Media
Specifications
NOTE:
For optimum print quality and printer performance, use of genuine Zebra supplies
is recommended.
Media Width: 1.00" (25.4mm) - 2.36"
(60mm)
Media Width w/ 2" Media Guide:
0.585" (15mm) - 1.44"
(36.6mm)
Label Length:
-
Minimum
- 0.38" (9.7mm)
-
Minimum
with label taken sensor used - 0.50" (12.7mm)
-
Minimum
with cutter - 1.0" (25.4mm)
-
Maximum
with standard memory - 39.00" (991mm)
Core Inner Diameter: 1.00"
(25.4mm), 1.5" (38mm)
Max Roll Diameter: 5.00" (127mm)
Media Thickness: 0.003" (0.08mm) -
0.007" (0.18mm)
Media Sensing: gap, black line,
notch
Media Types: roll-fed or fan-fold,
die cut or continuous direct thermal labels with or without black mark, tag
stock, continuous receipt paper, wristbands, and optional liner-free direct
thermal media.
Black Line Sensing:
Line Width - The black line
should run the entire width of the media.
The line should be flat or matt in appearance. This
significantly affects black line performance.
Dimension |
Min |
Max |
Recommended |
A |
None |
None |
0.40" (10mm) |
B |
0.12" (3mm) |
0.60" (15mm) |
0.20" (5mm) |
Calibration Procedure
The 2824 Plus is equipped with a
standard auto-calibration feature that initiates automatically during start-up
of the printer. Utilizing two to four labels to calibrate for efficient operation and less
waste. The printer will also save the new settings in memory until the next
calibration is performed.
A manual calibration procedure can
also be performed, if required. Consult your User Manual for more details on the
specific manual calibration steps.
ZPL
Programming Language (ZPL/ZPL II)
Communicates in printable ASCII
characters
Compatible with mainframe, mini,
and PC hosts
Downloadable objects include
graphics and bitmap fonts, label
templates and formats
Automatic memory allocation for
format while printing
Automatic serialization of fields
Format inversion (white on black)
Mirror-image printing
Four position field rotation (0,
90, 180, 270 degrees)
Slew command
Programmable label quantities with
print, pause
Status messages to host upon
request
ZPL
Font Specifications:
Character Fonts:
Standard bitmapped Zebra fonts: A, B, C, D, E (OCR-B), F, G, H, (OCR-A), GS, P,
Q, R, S, T, U, V & Ø
Smooth font (CG
Triumvirate Bold Condensed).
Supports user defined fonts and graphics
-
including custom logos
Bitmap fonts are expandable up to 10
times, height and width independent. Fonts E and H (OCR-B and OCR-A), however,
are not considered in spec when expanded.
Smooth scalable font
0 (CG Triumvirate
Bold Condensed) is expandable dot-by-dot, height and width independent, while
maintaining edges to a max. 1500 x 1500 dots.
ZPL Bar
Code Symbologies
Bar Code Ratios: 2:1
(non-rotated) and 3:1
Linear Bar Codes:
Code 11,
Code 39, Code 93, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, EAN-14, UPC-A and UPCE
with EAN 2 or 5 digit extensions, Plessey, POSTNET,
Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MSI, Codabar,
and GS1 DataBar
(formerly RSS)
2-Dimensional:
PDF417,
MicroPDF-417, Code 49, Maxicode, Codablock, Data Matrix, QR code, Aztec
EPL
Programming Language (EPL2)
ASCII EPL2 programming language
(Page Mode)
EPL Line Mode
Field Rotations
Variable field support (up to 100)
Counter support (up to 10)
Variable field addition and
subtraction
Status reporting
Form, fonts, and graphics storage
Simple set of formatting commands
Support of selected bar codes
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE July 29, 2009, 2824 Plus ZIH Corp 2009
EPL
Font Specifications
*
Spacing of Asian characters is controlled via the i command. The formula for CPI
is 203 / (32 + i). Thus as i increases, CPI decreases. For example: If i = 2,
CPI = 203/34 = 6.0
EPL Bar
Codes
-
Linear Bar Codes: Code 39,
Code 128A, B & C(User selectable/Auto), UCC/EAN-128, Code 93, Codabar,
Interleaved 2 of 5, UPC-A, UPC-E, UPC-A with 2 and 5 add on, UPC-E
with 2 and 5 add on, EAN 13, EAN 8, EAN 13 with 2 and 5 add on, EAN 8 with 2 and
5 add on, Postnet (5, 9, 11, & 13 digit) Japanese Postnet, Plessey (MSI-1),
MSI-3, German
Post Code, and GS1 DataBar
(formerly RSS).
-
2-Dimensional: Maxicode
(modes 2,3,4,6), PDF417, MacroPDF417, QR Code, Data Matrix, and Aztec
Communications Specifications
Centronics Parallel (36 Pin)
connector ports
RS-232 Serial and USB V1.1
interface
10/100 Ethernet (option)
Electrical Specifications
Auto-detectable (PFC Compliant)
100-240VAC, 50-60Hz
Agency
Approvals
-
Emissions: FCC Part 15,
Subpart B, VCCI, C-Tick
-
Emissions and Susceptibility:
(CE): EN55022 Class-B,
EN61000-3-2, EN61000-3-3 and EN55024
-
Safety:
CB Scheme IEC 60950:1991 +A1 +A2 +A3 +A4,
UL 60950
and C-UL, IRAM, NOM, AAMI
Physical Specifications
(no
options installed)2824 Plus
Height
6.75" (171 mm) 7.0" (178 mm)
Width:
4.37" (111 mm) 5.3" (135 mm)
Depth:
8.5" (216 mm) 9.5" (241 mm)
Weight:
2.7 lbs (1.2 kg) 3.5 lbs (1.6 kg)
Shipping Weight: 5.3 lbs (2.4 kg) 6.1 lbs (2.8 kg)
Environmental Specifications
Operating Temperature: 40 to 105
F (5 to 41 C)
Storage Temperature: -40 to 140 F
(-40 to 60 C)
Operating Humidity: 10% to 90%
non-condensing R.H.
Storage Humidity: 5% to 95%
non-condensing R.H.
Preventative Maintenance
Zebra recommends cleaning the
printer on a regular basis using
standard Zebra printer parts and cleaning supplies. Consult your User Manual for
further details.