Product: ZebraDesigner

Category: Label Design

Solution: Label Design

Symptom: Label Design

This solution is useful for:

This solution addresses the following problems:

Action: Designing a Basic Label

To start designing a label, open ZebraDesigner or ZebraDesigner Pro

The figure below shows the default working interface of ZebraDesigner Pro.

 

ZebraDesigner Pro working window

1.    Create a Basic Label

Start a new label.

2.    Select a Printer

Select the printer to use for printing

3.    Define Label and Page Dimensions

Select label stock or set custom size

4.    Enter Non-Changing Text

Type in static, non changing text data.

5.    Insert Bar Code

Define characteristics of any static bar codes

6.    Insert Picture

Insert image onto Label

7.    Use Drawing Tools

Add lines and shapes to the label

8.    Use Alignment Tools

Line up objects on the label.

9.    Save a Label

Always save the label during the design process.

10.    Preview and Print a Label

Check the label before printing it, then send it to the printer.
 


Notice: Zebra Technologies Corporation makes no representations about the suitability of this documentation for any purpose. It is provided "as is", for your information only, without warranty of any kind, either expressed or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

Windows and Windows Terminal Server are registered trademarks of Microsoft Corporation. Metaframe is a 
registered trademark of Citrix Systems, Inc.

Zebra Technologies Corporation

(C) 2004 ZIH Corp. All rights reserved.

Last Updated 06/27/2005